116 to 120 Film Spool Adapter Set/Kit 6X9 film mask and darkslide for Kodak 2A

Description

CAMERA SHOWN IS NOT INCLUDED!
The 116 film to 120 film was designed and 3D printed in my shop.
I put a roll of film through my Kodak 2A and the 120 film is narrower than 116 so the light coming through the film window in the back caused a great light leak. I then designed and 3D printed a sliding cover for the window to block the light. Works perfectly!
The kit comes with complete instructions and how to advance the film to get eight 6x9 exposures on a roll of 120 film.
Because you can no longer use the film window in the back (the sliding cover blocks the light and the window) I worked out the number of turns you need for proper film advancement. The instructions will come with the camera.
The 6x9 mask is attached via double stick tape, and can be removed.
The sliding dark slide (cover) does not interfere with the use of the camera.
The dark slide has a light seal to enhance the protection.
See a photo I took using the kit.
Please feel free to ask me any questions!