SPI SP-20P-SM-A-A-G-B 0801-003 20W SM SERIES PULSED FIBER LASER 7X BEAM EXPANDER

Description

YOU ARE BUYING ONE SPI SP-20P-SM-A-A-G-B SP-20P-0801-003 INDUSTRIAL PULSED FIBER LASER SYSTEM W/ 7X BEAM EXPANDER PT-P00398. CHILLER MANIFOLD/HEAT SINK IS ATTACHED ON THE BOTTOM. INCLUDES TDK LAMBDA SWS300-24 POWER SUPPLY. THIS IS A SPI G3 SM SERIES LASER 20 WATT. THIS UNIT WAS REMOVED FROM A SHUTDOWN FIRST SOLAR FACILITY AND IS GUARANTEED WORKING NOT D.O.A.
IF YOU HAVE ANY QUESTIONS PLEASE CALL, OR HIT ASK THE SELLER A QUESTION.(MWG15X2)(JL)
THE FOLLOWING IS FOR INFORMATION PURPOSES ONLY AND MAY NOT BE INCLUDED IN THIS AUCTION:
Features - 7 kW peak power with up to 20 W average output power - Gaussian beam profile for smaller features - First and last pulse equally useable - High speed marking compatible (2000 cps) - Bitmap marking compatible - Pulse width variable (across 25 pre-set waveforms) - Maximized peak power over full operational repetition rate - High reliability/repeatability/stability design - Analogue power control input, pulse gate, and pulse trigger - Status monitoring and safe shut down Applications Marking  Plastics  Metals  Poly-compounds  Silicon Scribing Ablation Silicon Processing Solar Cell Processing ITO Removal Thin film cutting Fine foil drilling The redENERGY™ G3 fibre laser platform uses SPI’s innovative PulseTune technology that offers the OEM integrator highly flexible control over pulse width and peak power for deployment in multiple applications. The unique PulseTune function on the SM models enables market-leading repetition rates whilst maintaining peak power threshold. These products are designed to address the majority of laser-marking and micromachining applications with peak powers exceeding 7kW. By enabling high repetition rates this product is high speed marking compatible out of the box and, with the added function of a CW mode of operation, bitmap marking is just plug-and-play. It is an easy-to-integrate DCpowered OEM fibre laser module with integral controller designed to interface with common laser-marking equipment. The SM range offers an extension in capability to SPI’s range of pulsed laser products with an M² of <1.3 and giving narrower marking lines and features. G3 SM Control Interfaces Software interface (RS-232 control) ● Hardware interface (PC-free operation) ● Modes of Operation Pulsed ● CW mode ● Pulse Characteristics Selectable pulse waveforms ● 1 - 500 kHz pulse rate ● Integrated controller ● Fast rise-time ● Temperature correction ● General Features Pump recalibration facility ● Operating Temperature Range 55°C base plate (45°C ambient) ● G3 SM Series 12-20W Pulsed Fiber Lasers With GTWave™ and PulseTune Technology www.spilasers.com ©2009 SPI Lasers UK Ltd SM-S00147 A SPI Lasers UK Ltd, 3 Wellington Park, Tollbar Way, Hedge End, Southampton SO30 2QU, UK UK office: +44 (0)1489 779 696 SPI Lasers LLC, 1700 Wyatt Drive, Suite 1 Santa Clara, CA 95054 US office: +1 408 884 3090 Model 12W / SM 20W / SM Specifications Peak Emission wavelength 1062 ± 3 nm Modes of operation Pulsed/ CWM Minimum specifications 12W / 6kW 20W / 7kW Minimum Pulse Energy @ PRF0 0.4 mJ 0.5 mJ Pulse repetition range Full power range 30 – 500 kHz 40 - 500kHz Reduced power range 1 - 30 kHz 1 - 40 kHz Modulation range in CW Up to 100 kHz Output power stability (typical) ≤ 5% Output beam characteristics Beam Diameter, nominal 0.8 – 7.2mm with selected BET option M² ≤ 1.3 Polarization state Random Beam delivery cable length 2 m Red alignment laser Optional Electrical Laser head power supply requirement 24 V / 7A 24 V / 10 A Mechanical Laser module weight < 6kg Laser module dimensions 352 x 198.2 x 77 mm Cooling Requires heat sink attached to base ≤0.1°C/W Environmental Ambient temperature range 1 0°C to +45°C Humidity 5 – 95% RH (non condensing) Accessories Beam expanders: 2.6x, 4x, 5x, 7x, 9x Power Supply Pulsed laser cooling kit Power and Communications Cables Terms and conditions Some specific combinations of product and optional accessories may not be available. These lasers are designed as products for incorporation or integration into other equipment. All product information is believed to be accurate and subject to change without notice. A complete product specification will be issued on request and also at time of order acknowledgement. The user assumes all risks and liability whatsoever in connection with the use of the product or its application. For a guide to compatible driver hardware or software, please contact your local SPI Lasers Sales office
International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.